Has anyone tried this with the 48 led strips cut down to 27?

I cant find the 30s anywhere, anyone know of a source?

I tried the 48s but when cut down to 27 the last 3 dont work

thats the problem chap you have to have the 30 led strips - if you search on ebay you will find them (normally hong kong or china.

I too had many issues with the led strips, BUT stick with it because once its done it looks the NUTS.com.......

http://i53.photobucket.com/albums/g46/ab...pg?t=1395525323

you'll see what I mean.

as for Ebay: I can only find this listing (so far) for 10 LED strips. for 24.99 odd which aint bad all in all, and I'm definitely sure peeps on here will buy any surplus you may have.

http://www.ebay.co.uk/itm/10X-RED-30CM-3...=item35cdb11856



as for the lenses if you got any questions you can PM me (I did mine similar to the others, but added silicon to the seal.

R00

I have cut down 48's before and it's a major ball ache, the leds are grouped in threes and if you cut them in the wrong place you lose a set. Look carefully at the copper strips inside the plastic and you should be able to see where to cut. I seem to remember i had to remove one or two led's from the start of the strip to get 27. In all, not worth the hassle.

Cheers fellas

Think I'll get the set of 10

I have used 48's for rear lights and never had an issue- I might just have been lucky but as James said they are wired in 3's and you're taking 7x3 away. Finding 30's is pretty much impossible now but the 48's are quite cheap even if you do get unlucky.

Very pleased with the end results though!

http://www.ebay.co.uk/itm/24-48-96-120-L...=item4173206353 is where I got mine from and didn't take very long to arrive (maybe a week tops)

Aahhh, I have a new style of rear light (Top Secret) under construction at present, all will be revealed soon......

cool beans!

im still fond of the led set up, nice n cheap.

i thought of getting a set of leds and drilling holes into the cup to space them evenly but was too much of a faff.

having chopped a set of the 48 leds up, ive tried a double ring and that seems to work nicely!

btw, i managed to get the set of 3 working, but it involved cutting into the silicon and soldering etc. definitely not worth the faff!!!

I hope I can get them finished for Piazza Italia, if the coupe gets through its MOT tomorrow

Does anyone know the diameter of the rear lenses?

100mm diameter, the housing is slightly bigger

Brilliant thanks

Internal are 90mm fit a treat
Passed MOT

New solid LED ring, internally fitted.