Got the leds off ebay £3.50p inc delivery for a pair,got a spare set of rear lights.... followed the "How to guide" and 2 mins to fit each side. Jobs a gooden
Wanted to keep the rear looking original with the lights off, so only did the top 2 lights.

The pic below is showing the drivers side fitted compared to the nearside original... and I washed the coupe after the pic was taken !!

I have kept my original lights which can be fitted back to my Coupe in a couple of minutes

nice job Naf

Can post the link to the LED's please

Very nice Naf

Get some spare leds while you can and at that price, as one of my first ones failed in less than a year

I had spare ones though, so easily replaced

The link to the leds is below
http://www.ebay.co.uk/itm/2-x-48cm-RED-C...=item3365668375

And yes Theresa..... I have already ordered an extra couple of pairs

looking good Nathan but you could have washed the car

Nice chapper, - following out discussion - chap - youve made the correct choice, -looks nice chapper,

arent you happy you did it now.

I also have to whip the reverse/indicator out and re-doo the lights again, (3 leds out) in the light cluster.

shitter - but to be done soon.

R00

I'm well pleased with the Led's R00.... I loved the original look of my Coupe Plus..... but As you've seen at AutoItalia I've added a couple of little extra's to improve the look..(Imo) Carbon look centre console and door pillars.
It takes minutes to swap over the rear lights and the leds are so cheap and it makes such a big difference to the rear at night

Good effort, a very nice mod and brings in back to the now

Thanks

Looks good ! So the led's come on as tail light instead of tail light bulb?

Yep.... The bulb is still in there but the wire is cut....... You could have them working either as the tail light or as a brake light, depending how you choose to wire them up!!!

I ev ordered my leds ,What do the LEDs look like in the bottom indicated/reverse lights as on the how to?

Looks great Naf, welcome to the slippery slope of led's

Looks very nice naf do you fit them inside the lens or are they glued on the out side ?

Thanks mate

All done properly mate, you split the old lights and fit the LEDs inside the rear lens then glue back together and apply some sealant around the edge..... Job done!!
There is a 'how to guide' on the forum.

I only did my sidelights, I'm sure some one on here has done the indicators and kept the original lenses

That would be Edz and Thunderbox IIRC

how to for the rear led lights - http://www.fiatcoupeclub.org/forum/ubbthreads.php?ubb=showflat&Number=1214112#Post1214112

i have done the top and bottom lights but left them so it looks standard during the day but at night you get two sets of rings as tail lights and the bulbs do the rest for brakes , indicators , fog and reverse lights .

I have mine set up the same too

Maybe that's because I copied nismo though

Do they look red through the orang indicator lenses? I fido my side lights very pleased. I ev got led replacement buld brake lights too but get this on my 16vt drivers side works fine, passenger side makes my abs light on dash come on and no abs! So I ev got a standard build in so it works not figured out how to get around this one yet?

What am i doing wrong? wired my LED's up just the top side lights,

LED wire - to black + to orange in side light connecter block LED's come on ok but the side light bulb comes on as well, brake light ok,

how do i stop the side light bulb from working.

Have you cut the orange wire..... It mustn't stay connected as it lights the side lights?

AAh, no i've not i'll try that, cheers

That's worked a treat Naf,