Just tried fitting mine, bought it second hand from Joe78. It's too low, the pipe that runs under the rad support is far too low, I can't get it off the drive, left a big dint in the concrete when I tried
I'm going to have to route it like RMJ and Leon. Also Joe ran a SIP and thus the right hand pipe has been routed to the inlet where the normal airbox would be. HEADACHE!
I notice everyone seems to have a straight bit of metal to use to mount the I/C onto the metal just under the slam panel. Did this come with the kit? as I don't have anything similar, just two rectantular pieces of metal that don't seem to fit anywhere