Found a brand new Brand new genuine Fiat Coupe bonnet catch pin & release lever of E bay number 231231736569 for £22 bargain and delivered within 2 days.
Get one while you can at this price as I cant imagine you will be able top get a new one ever again.
Last edited by Dale; 19/10/201423:34.
Re: Having problems opening the bonnet then get this!!
[Re: ]
#1512292 20/10/201406:5120/10/201406:51
have you been able to verrify that this actualy fits? and does it fit on all the coupe models? i am having problems opening mine, take's me 5 pulls to actualy get it to unlock so i am very interrested.
Re: Having problems opening the bonnet then get this!!
[Re: ]
#1512307 20/10/201408:5420/10/201408:54
have you been able to verrify that this actualy fits? and does it fit on all the coupe models? i am having problems opening mine, take's me 5 pulls to actualy get it to unlock so i am very interrested.
Sounds like you should have a quick check on the condition of the loop at the end of the cable before it gets any worse and breaks....
BumbleBee carer
Re: Having problems opening the bonnet then get this!!
[Re: ]
#1512310 20/10/201409:1720/10/201409:17
yep i just did a how to search and found that post about it, gone have a look tonight. seemingly you can open de bonnet from the outside of the car using a 6 bit key. will have a look to how that's supposed to work incase my cable does break.
Re: Having problems opening the bonnet then get this!!
[Re: ]
#1512333 20/10/201414:2720/10/201414:27
I bought one before they put the price up. Much better than the rusty old thing, one thing less to refurb. and the new adjuster works a treat. Money well spent.
Re: Having problems opening the bonnet then get this!!
[Re: ]
#1512341 20/10/201415:3620/10/201415:36
For the wire loop - sleeve with Raychem or glue shrink and it will last much better.
If your cable has broken it can be fixed to the point of being better than the factory RHD installation. I`ll post on this thread later showing what you need to do this. I bet LHD cars had far fewer instances of bonnet release cable failure because the installation wasn`t flawed for LHD? Jon
Re: Having problems opening the bonnet then get this!!
[Re: ]
#1512357 20/10/201417:3620/10/201417:36
If cable broken, get one of these from your friendly model aircrafter, fill arrowed end with epoxy, insert cable end which you have cut to correct length, crimp also - use vice and small nail if you don`t have a crimper. Add 2 washers and 2 nuts and you have a better mechanism.
Re: Having problems opening the bonnet then get this!!
[Re: ]
#1512402 20/10/201422:2520/10/201422:25
Cant say that I've tried fitting it yet, however looks exactly the same so cant imagine why it wont fit. Get one while they are for sale, as your never get a new one again!!!