330mm disc brake brembo

http://bremboaftermarket.com/En/Car_Disc_Catalogue/Catalogue_Detail.aspx?ApplicationIDMaster=12120 330mm 28thicknes 4 holes (4*98mm?) holy grale for everyone who are looking for cheap brake upgrade?

you are the man.

no questions.

you are the man.

just to edit my post, just double checked them with the coupe brakes and there spot on!!!

what a find!!

only one question there is no info about if theye are 4*98 or 4*100 i cant find it on lancia or brembo site

well, best thing i did was compare the fiat coupe info on that site towards the lancia disc.

all the data was the same!

so they are going to be the same offset....
right?

(ive had a couple of beer's so not a 100%)

But the 20vt disc is 305mm - these won't fit inside the standard wheel, or inside the standard caliper

of course!
you will need the 147 GTA front calipers (or calipers that can suit the disc)
and bigger wheels...say...team dynamic pro race 1.2

If the PCD is incorrect ie 100mm. 4 larger clearance holes (14mm) would sort it. No need for the stud holes to be a good fit as the disc locates on the centre hole, assuming this is the correct size. I thought the Coupe was 58mm not 59mm as these discs

Hello guys!

Does someone know, where can I buy brake caliper adapter for 20V turbo coupe to can install on the alfa 4 pots brembo brakes(alfa 159 radial screwing)?

thanks

I am not sure that you can find one to buy for that brake calipers,but its not that hard to make it by yourself.

The adapters for the Alfa Romeo 147/156 GTA big brakes aren't suitable?

This is an old thread resurrection, did anyone find out if the discs are suitable (wheel and caliper issues aside).

If the link was for the Lancia Delta (new one) 1.8 then they should be ok. Ive got some coming to me this week but the dimension say they are ok. Then I just need to fit the Maserati Brembos!

Thanks Tom - let me know how you get on. What size wheels are you using?