http://www.fccuk.org/forum/ubbthreads.php RSS Feed for Styling Fiat Coupe Forum - UBB.threads(tm) http://www.fccuk.org/forum/ubbthreads.php?ubb=showflat&Number=1078209#Post1078209 Posted by patch234:
Yes, this is a rotary, means, you don't do it right, you lose paint or make the lacquer extremely thin! A decent DA (extremely hard to 'strike through' with these - usually!) will cost you around £]]> Thu, 29 Jul 2010 21:26:11 BST http://www.fccuk.org/forum/ubbthreads.php?ubb=showflat&Number=1078147#Post1078147 Posted by Trappy:
[quote=Per]There's another recent thread on this, partly. I just did mine (and the ashtray + surround) and what you need is methanol, steelwool and PATIENCE! And in the end, a good paint shop.. [/quot]]> Thu, 29 Jul 2010 19:34:42 BST http://www.fccuk.org/forum/ubbthreads.php?ubb=showflat&Number=1078039#Post1078039 Posted by alexjames:
PM Mariusz]]> Thu, 29 Jul 2010 14:14:47 BST http://www.fccuk.org/forum/ubbthreads.php?ubb=showflat&Number=1077846#Post1077846 Posted by iusedtoown:
hids are so much cheaper now and i tried some nightbreakers and was dissapointed in h1.. dont forget to upgrade the sidelights to led as these will compliment far better than std yellow bulbs and aga]]> Thu, 29 Jul 2010 04:47:32 BST http://www.fccuk.org/forum/ubbthreads.php?ubb=showflat&Number=1077763#Post1077763 Posted by Theresa:
Yes, you could put a U shaped piece around it (well, an upside down U) and it would look ok, depending how well it was done. Personally, I'm not too keen on the Postert lip, as I don't like the way]]> Wed, 28 Jul 2010 20:25:47 BST http://www.fccuk.org/forum/ubbthreads.php?ubb=showflat&Number=1077608#Post1077608 Posted by Nello:
All for modding mate but keep the LE looks - they are what makes it an LE.........apart from lowering - that makes the standard wheels look ok IMO]]> Wed, 28 Jul 2010 15:29:42 BST http://www.fccuk.org/forum/ubbthreads.php?ubb=showflat&Number=1077292#Post1077292 Posted by pinin_prestatyn:
I've done it before on my old coop with no probs. Will do it tomorrow then. ]]> Wed, 28 Jul 2010 02:12:13 BST http://www.fccuk.org/forum/ubbthreads.php?ubb=showflat&Number=1077224#Post1077224 Posted by xchipx:
Here is my matt black crx ( actually its not MATT but satin ) [imgpop]http://i6.photobucket.com/albums/y216/xchipx/22052009301.jpg[/imgpop] If you know how to do it, it will look great. ]]> Tue, 27 Jul 2010 23:45:56 BST http://www.fccuk.org/forum/ubbthreads.php?ubb=showflat&Number=1077212#Post1077212 Posted by andre333:
Not exactly rocket science. If I can convert an FBD program to ladder and understand how a thyristor/transistor works.......I might be ok. :D ]]> Tue, 27 Jul 2010 23:37:28 BST http://www.fccuk.org/forum/ubbthreads.php?ubb=showflat&Number=1077156#Post1077156 Posted by bridges:
[quote=szkom][quote=bridges][quote=szkom]Did you cut the bolts down by the same amount? That would cause problems if not. [/quote] why is that? [/quote] Because you would end up with 4 different]]> Tue, 27 Jul 2010 22:03:49 BST http://www.fccuk.org/forum/ubbthreads.php?ubb=showflat&Number=1077118#Post1077118 Posted by jase:
Yes i applied lacquer i also used curving masking tape it made it easier to do. I could only spray 2 strips at a time though and you need to leave the fresh paint overnight and make sure its dry befor]]> Tue, 27 Jul 2010 21:09:58 BST http://www.fccuk.org/forum/ubbthreads.php?ubb=showflat&Number=1076889#Post1076889 Posted by pfoe:
I've never seen one though I'd quite like to so couldn't tell you whether theyre god quality, they are without doubt photoshop illustrations though.]]> Tue, 27 Jul 2010 16:12:42 BST http://www.fccuk.org/forum/ubbthreads.php?ubb=showflat&Number=1076562#Post1076562 Posted by tim42:
Ordered some Team Dynamics Pro Race 1.2s (17") with T1Rs fitted from Rochford Tyres in Essex. They are made to order (21 days) but should get them this week. They are guaranteed (?) to clear the Bremb]]> Tue, 27 Jul 2010 08:13:26 BST http://www.fccuk.org/forum/ubbthreads.php?ubb=showflat&Number=1075963#Post1075963 Posted by bockers:
Do a search . They have been discussed loads of times http://www.fccuk.org/forum/ubbthreads.php]]> Sun, 25 Jul 2010 21:51:05 BST http://www.fccuk.org/forum/ubbthreads.php?ubb=showflat&Number=1075030#Post1075030 Posted by Per:
I found the best way to de-gunk was to use steel-wool (you know, kitchen stuff) and methanol. Not at all quick but the quickest.. Will do the B-pillars later this autumn. Thanks for all help!]]> Fri, 23 Jul 2010 16:54:52 BST http://www.fccuk.org/forum/ubbthreads.php?ubb=showflat&Number=1074922#Post1074922 Posted by Catman11:
thats the very one , I was in the scooby , so I didnt want to toot like an idiot, and wave LOL so I just admired it quietly. That truely is one of the nicest "different" coupes I have seen . ]]> Fri, 23 Jul 2010 13:36:28 BST http://www.fccuk.org/forum/ubbthreads.php?ubb=showflat&Number=1074770#Post1074770 Posted by 20vTsi:
Hi everyone, After reading the excellent how to on angel eye fitment I thought I'd fit some and use them as DRL's only after looking for about a month now (when I remember) I'm kinda loosing hope o]]> Fri, 23 Jul 2010 10:35:30 BST http://www.fccuk.org/forum/ubbthreads.php?ubb=showflat&Number=1074745#Post1074745 Posted by duncan78:
[quote]looking for probably 5000k with mini ballasts as like a slight blue tint not complete white..[/quote] I think 5k would give white with no or (v.marginal) blue tint. For a noticeable blue ti]]> Fri, 23 Jul 2010 10:05:57 BST http://www.fccuk.org/forum/ubbthreads.php?ubb=showflat&Number=1074743#Post1074743 Posted by Paulioski:
how much is your rear arch de-rust/respray? I need mine doing... its next on the list (as well as front and rear bumper respray...) then bonnet..... then... argh... :rolleyes:]]> Fri, 23 Jul 2010 10:05:46 BST http://www.fccuk.org/forum/ubbthreads.php?ubb=showflat&Number=1073440#Post1073440 Posted by Marco20valveT:
:D]]> Wed, 21 Jul 2010 12:01:38 BST